Brydge 12.3

  • Pairing your Brydge 12.3

    Hold the Function key and then tap the power button on the top right hand side of your Brydge, the green light will turn on, then off after about 3 seconds. Open up the settings on your Surface and select "Devices", then, "Add Bluetooth or other devices" Select Bluetooth on your screen, then pres...
  • Battery

    To check battery life, press the battery key. The Delete key will flash three times: Green = 75-100% Yellow = 25-74% Red = 10-24% When battery is 9% or lower, backlit keys will be disabled and Delete key light will flash continuously. Insert the supplied Micro USB cable Charging is confir...
  • Compatibility

    The Brydge 12.3  is designed to fit the Surface Pro 4, 5, 6 and 7. Please note: Using an incorrect Brydge/Tablet combination, or, any compatibility not listed on our website is not approved by Brydge and will put your products at risk for damage. Unauthorized use of the Brydge will also void a...
  • For Surface Pro 3 Users

    The Silver model Brydge 12.3 is compatible with the Surface Pro 3, however, you must swap out the rubber shims with the extra pair included in the box. These are specifically designed to fit the thicker dimensions of the Surface Pro 3 and should be done prior to inserting your device.
  • Key Commands and Shortcuts

    Backlit Keys Fn +  ctrl (Press 1-3 times for backlit levels. Press 4 times to turn off) Language Switch Win + Spacebar (Spacebar allows you to toggle through available languages) Touchpad Diable/Enable FN + Alt Hold Fn and tap Alt to disable Hold Fn and tap Alt again to enable Sw...
  • Lagging Keys / Missed Key stokes

    For Lagging or missed keys, please refer to the following troubleshooting: Open up the settings in your Surface Pro Select "Devices" Tap Brydge 12.3 on your screen and select "Remove Device" Now you can restart your Surface Pro. To do this, please refer to instructions below: Tap the Windows Lo...