Pairing your Brydge with your Surface tablet
Hold the Function key and then tap the power button on the top right hand side of your Brydge, the green light will turn on, then off after about 3 seconds.
Open up the settings on your Surface and select "Devices", then, "Add Bluetooth or other devices"
Select Bluetooth on your screen, then pres...
To check battery life, press the battery key. The Delete key will flash three times:
Green = 75-100%
Yellow = 25-74%
Red = 10-24%
When battery is 9% or lower, backlit keys will be disabled and Delete key light will flash continuously.
Insert the supplied Micro USB cable
Charging is confirmed ...
The Brydge 12.3 is designed to fit the Surface Pro 4, 5, 6 and 7.
Using an incorrect Brydge/Tablet combination, or, any compatibility not listed on our website is not approved by Brydge and will put your products at risk for damage. Unauthorized use of the Brydge will also void any...
For Surface Pro 3 Users
The Silver model Brydge 12.3 is compatible with the Surface Pro 3, however, you must swap out the rubber shims with the extra pair included in the box. These are specifically designed to fit the thicker dimensions of the Surface Pro 3 and should be done prior to inserting your device.
Key Commands and Shortcuts
Fn + ctrl
(Press 1-3 times for backlit levels. Press 4 times to turn off)
Win + Spacebar
(Spacebar allows you to toggle through available languages)
FN + Alt
Hold Fn and tap Alt to disable
Hold Fn and tap Alt again to enable
Switch to Window...
Lagging Keys / Missed Key stokes
For Lagging or missed keys, please refer to the following troubleshooting:
Open up the settings in your Surface Pro
Tap Brydge 12.3 on your screen and select "Remove Device"
Now you can restart your Surface Pro. To do this, please refer to instructions below:
Tap the Windows Lo...